Cirrus-logic AN269 Manual de usuario descargar pdf (Pagina 12)

12 AN269REV1

AN269

The output mode “2-2/3 Pixels Per Clock” is shown in Figures 5, 6, and 7. Since this mode is rather complex, one

diagram shows data during each of the first, second, and third SPCLK outputs. In this mode, each SPCLK will clock

out 2-2/3 pixels, with 1 bit representing the Red, Green, and Blue components of the pixel.

In the first SPCLK, pixel 0’s Red, Green, and Blue components are clocked out of P[2:0]. Pixel 1’s Red, Green, and

Blue components are clocked out of P[5:3]. Note that ONLY the Blue and Green component of Pixel 2 are clocked

out of P[7:6]. The Red component of pixel 2 will be clocked out during the second SPCLK.

Pixel Data Bus

Pins P[17:0]

Pixels 0, 1, and 2 (First SPCLK)

Pixel Data Most Significant Bits

(from LUT and Blink Logic)

Figure 5. 3 Bit Per Pixel Formatted as 2-2/3 Bits, First SPCLK

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Sin comentarios

Cirrus-logic AN269 Manual de usuario Pagina 12