Cirrus-logic EP93xx Manual de usuario Pagina 575

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 824
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 574
DS785UM1 15-17
Copyright 2007 Cirrus Logic
UART2
EP93xx User’s Guide
1
5
1
5
UART2TMR
Address:
0x808D_0084 - Read/Write
Default:
0x0000_0000
Definition:
UART SIR Loopback Register
Bit Descriptions:
RSVD: Reserved. Unknown During Read.
0: Must be written as “0”. Unknown During Read.
SIRTEST:
SIR test enable. Setting this bit to “1” enables the receive data
path during IrDA transmission (testing requires SIR to be
configured in full-duplex mode). This bit must be set to “1” to
enable SIR system loopback testing, when the normal mode
control register UART2Ctrl bit 7, Loop Back Enable
(LBE), has
been set to “1”. Clearing this bit to 0 disabled the receive
logic when the SIR is transmitting (normal operation). This
bit defaults to 0 for normal (half-duplex) operation.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSVD
1514131211109876543 2 1 0
RSVD 0SIRTEST0
Vista de pagina 574
1 2 ... 570 571 572 573 574 575 576 577 578 579 580 ... 823 824

Comentarios a estos manuales

Sin comentarios