Cirrus-logic CRD5376 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
CRD5376
DS612RD2 5
1. INITIAL SETUP
1.1 Kit Contents
The CRD5376 reference design kit includes:
CRD5376 reference design board
USB cable (A to mini-B)
Software download information card
The following are required to operate CRD5376, and are not included:
Bipolar power supply with clip lead outputs (± 3.3 V, 300 mA)
PC running Windows XP
®
or Windows 2000™ with an available USB port
Internet access to download the evaluation software
1.2 Hardware Setup
To set up the CRD5376 reference design hardware:
Verify all jumpers are in the default settings (see next section).
With power off, connect the CRD5376 power inputs to the power supply outputs.
J8 pin 17 = -3.3 V
J8 pin 18 = 0 V
J8 pin 19 = +3.3 V
J8 pin 20 = 0 V
Connect the USB cable between the CRD5376 USB connector and the PC USB port.
Proceed to the Software Setup section to install the evaluation software and USB driver.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 67 68

Comentarios a estos manuales

Sin comentarios