Cirrus-logic CDB470xx Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 87
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
CDB47xxx Main Board System Description
CDB47xxx User’s Manual
DS886DB11 Copyright 2014 Cirrus Logic, Inc 1-8
selection header. Pin 1 of each header is marked with a triangle and the word “REG”. Pin 2 of each
header is labeled with the voltage required for that pin (+5V, +3.3V, or +1.8V).
1.3.7 Digital Audio Input Source Multiplexer (U1)
The audio input source multiplexer has the following characteristics:
Source 1: Optical S/PDIF Input
Source 2: Coaxial S/PDIF Input
Source 3: Digital Audio Input (DAI) Header
This multiplexer is used to select which audio source feeds the CS470xx DAI3 pin. When the CS470xx
has DAI3 configured as a S/PDIF receiver, either Source 1 or Source 2 can be selected by the MCU.
When DAI3 is configured as a standard I2S input, Source 3 can be selected as the data source.
The CDB47xxx has been designed to indicate which input is currently selected by illuminating a specific
LED for each Source, as described below:
Source 1 selected: D12 will be on
Source 2 selected: D51 will be on
Source 3 selected: D5 will be on
1.3.8 CS470xx Audio System-On-a-Chip (ASOC)
The CS470xx ASOCs are a family of ICs designed specifically for audio applications. The CDB47xxx
allows a designer to evaluate the CS470xx ASOCs in many different modes of multi-channel input and
output. The 100-pin footprint on the daughtercard is compatible with any CS470xx chip that uses the
LQFP100 package.
Audio input data to the ASOC can come from any of the following sources:
Line-Level Analog Audio Input Connectors
Optical S/PDIF Input Connector
Coaxial S/PDIF Input Connector
DAI Header
Audio output data from the ASOC can be sent to the following destinations:
Line-Level Analog Audio Output Connectors
Optical S/PDIF Output Connector
Coaxial S/PDIF Input Connector
DAO Header
The CS470xx can be booted from external serial Flash for custom applications in which a host MCU is not
desired.
The CDB47xxx also allows the PC to act as a host to boot and configure the DSP through the GUI
software for real-time configuration of the audio processing.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 86 87

Comentarios a estos manuales

Sin comentarios